Security banister


Security banister

You can made these security banisters. I made one for my old father to avoid that he's falling down during night. It is very easy to setup up and down, even for an old person. Materials:

  1. One (1) strip 1 m long x 12 cm x 2 cm
  2. Two (2) stripes 40 cm x 3 cm x 2 cm
  3. Two (2) stripes 5 cm x 2 cm x 2 cm
  4. Four (4) bolts 3" long x 1/2" with nuts and washer.


  • Electric drill with 1/2" drill bit for metal or wood.
  • Wrench for the bolts.


  1. Cut all the stripes you need.
  2. Make the holes on the stripes (see drawing plan).
  3. Measure carefully the final position of the banister on the bed and mark were to drill.
  4. Install the banister and put the two stripes (stop) (see drawing plan).
  5. And voila ....


Add a Comment

Sign in to comment.